Benefits of An Encapsulated Crawlspace Installed in Birmingham, Alabama
- Stop Moisture and Prevents Mold Problems
- Energy Savings - Up to 35%
- Improves Indoor Air Quality
- Eliminates Odors
- Retards Rodents and Insects
- Helps HVAC Efficiency
- Prevents Rotting Wood and Foundation Issues
- Improves occupant health
- Helps Maintain a Comfortable Home
What is an encapsulation system installed by Mold & Mildew Solutions
Crawlspace fabric encapsulation refers to the process of dividing the area below your home from your actual living space or building envelope. When done correctly an encapsulated crawlspace will prevent the passage of contaminants from the crawlspace entering your living environment and creates healthier living conditions. Encapsulation covers all the dirt floor, concrete foundation walls and piers. This will prevent mold, moisture, and radon from rising into the interior of the home. If your crawlspace floods, or frequently has water flowing through it, you will want us to install a water management system like a sump pump and dig proper drainage ditches to divert the water away from your home. This would be done before the floor of the system was installed.
Sealing around, open plumbing, duct work, filling up any open cracks or holes at the floor joist or foundation, properly covering outside vents in the crawlspace will help the space under your house remain healthy by keeping bad air out and conditioned air in.
Then the space must continue to maintain a healthy humidity to condition the space and to not cause condensation in the crawlspace. We do this by installing the most durable rugged dehumidifiers available that also meet energy star requirements. Attaching a condensate pump or installing drainage pipes or lines to route water out of the space.
Sealing around, open plumbing, duct work, filling up any open cracks or holes at the floor joist or foundation, properly covering outside vents in the crawlspace will help the space under your house remain healthy by keeping bad air out and conditioned air in.
Then the space must continue to maintain a healthy humidity to condition the space and to not cause condensation in the crawlspace. We do this by installing the most durable rugged dehumidifiers available that also meet energy star requirements. Attaching a condensate pump or installing drainage pipes or lines to route water out of the space.
By allowing Mold & Mildew Solutions to install your encapsulation system in Birmingham, you can be assured that you will have a dry crawl space.
PREMIUM 20 MIL Encapsulation System installation
|
Mold & Mildew Solutions can install a premium encapsulation system making a total of a seven ply barrier. It consists of three layers of high strength polyethylene fil, two layers of molten polyethylene, and two layers of polyester cord reinforcement that is laminated together. It is blue on the ground side and bright white on the top. Both sides are protected with UV stabilizers. This crawlspace fabric has exceptional impact, puncture, and brute tear resistance. This barrier is treated with antimicrobial finish to prevent mold growth. Walls and piers will be covered in a 12 Mil fabric. By adding drainage matting you can use space for extra storage. This install carries a 25 year warranty. This product is the the best in the industry.
A premium install by Mold & Mildew Solutions will provide you with a long lasting property investment. |
STANDARD 10 MIL Encapsulation System Installation
|
This encapsulation option is a 10 mil cord reinforced crawl space liner with antimicrobial protection. It Is green on the ground side and bright white on the top. Walls and piers will be covered in a 12 Mil fabric. The fabric is made with recycled materials making it a green product. This install carries a 10 year warranty.
Create a clean and dry crawlspace to protect your home and family while saving the environment and being economical. |
If a crawl space system is not encapsulated correctly then it may cause more harm than good!
PRINCABLES FOR A HEALTHY AND DRY CRAWL SPACE-PERFORMED BY MOLD & MILDEW SOLUTIONS
- Remove Mold, Fungi, and Organic Materials from the Crawlspace
- Install Systems to Carry Water Out of the Crawlspace
- Cover Dirt Floors and Concrete to Block Moisture
- Cover all Opening and Cracks
- Have Air Circulating to Condition Space
If your crawl space floods, has standing ground water flowing or pooling under your house you will want Mold & Mildew Solutions, install crawl space water drainage solutions to divert the water out of your crawlspace. You do not have to live in an unhealthy, musty home.
CUSTOMIZED WATER MANAGEMENT SOLUTIONS
      |
     |
